Overview
Public AC charging station with two Type 2 sockets
e:car WALL PRO PREMIUM AFIR is an AC charging station for public and commercial sites with two Type 2 sockets and an output of 22 kW, variable up to 2× 22 kW. Each output has its own MID-certified meter, the 7″ display shows a QR code for payment and the station complies with the AFIR regulation. Designed and manufactured in the Czech Republic.
Key features
Two outputs
Two Type 2 sockets for the vehicle's own charging cable.
MID billing meters
Each output has its own MID-certified energy meter. Energy delivered can be billed accurately and verifiably, or allocated to employees or guests.
7″ display
Shows charging information and, when operated on an OCPP back end, a QR code for payment via a terminal, and static images or video while the station is idle. A vandal-resistant button switches the display language.
Control and access
LAN, OCPP 1.6J and 2.0.1, a 13.5 MHz RFID reader and over-the-air (OTA) firmware updates. Load Balance shares the available supply capacity between stations and requires IONT meter.
Protection
EV residual current device for each output (AC 30 mA + DC 6 mA); no Type B RCD is required. Temperature sensors in the power electronics stop charging if the temperature is too high.
Construction and warranty
Stainless steel body, tempered glass and a painted front panel, lockable with shaped locks, IP54 rating, operation from −30 to +50 °C. Warranty: 2 years on the unit, 3 years on the power electronics.
Technical specifications
| Power supply | 3× 400 V AC, 50 Hz or 230 V AC, 50 Hz |
|---|---|
| Charging power | 22 kW (three-phase), variable up to 2× 22 kW |
| Outputs | 2× Type 2 socket |
| Protection | EV RCD for each output, AC 30 mA + DC 6 mA |
| Temperature sensors | power electronics |
| Metering | MID-certified meter for each output |
| Payment | QR code for payment via a terminal when operated on an OCPP back end |
| Power management | Load Balance, power sharing between stations (requires IONT meter) |
| Communication | LAN, OCPP 1.6J, OCPP 2.0.1 |
| Authorisation | autonomous mode, RFID 13.5 MHz |
| Display | 7″, shows QR code, information, images and video |
| Controls | vandal-resistant language button |
| Updates | over-the-air firmware (OTA) |
| Status indication | RGB charging status indicator |
| Ingress protection | IP54, indoor and outdoor |
| Operating temperature | −30 to +50 °C |
| Construction | stainless steel body, tempered glass, painted front panel, shaped locks |
| Front panel | Cookie brown |
| Dimensions | 620 × 430 × 174 mm |
| Wire connection | push-in terminals |
| Standards | IEC 61851, IEC 62196 |
| Public charging | compliant with the AFIR regulation |
| Made in | Czech Republic |
Configuration and quotation
Access settings and delivery date are specified in the quotation. Installation and commissioning are carried out by certified IONT partners.