Overview
Three-phase AC charger with Type 2 socket
The e:car WALL single BASIC is an AC charging station for electric and plug-in hybrid vehicles, rated at up to 11 kW. An integrated EV protection device, a stainless-steel body with tempered glass and IP54 protection make it suitable for home and business charging, indoors and outdoors. Designed and manufactured in the Czech Republic.
Key features
Locking socket
The Type 2 socket with a motorised lock holds the charging cable in place. The lock releases automatically in the event of a power failure.
Residual current protection
Integrated EV protection device (AC 30 mA + DC 6 mA); no Type B RCD is required.
Thermal protection
A temperature sensor in the power electronics monitors operation under sustained load.
Construction
Stainless-steel body and tempered glass, IP54 rating, operation from −30 to +50 °C. Mounts on a wall or a pedestal.
Warranty
2 years on the unit, 3 years on the power electronics.
Technical specifications
| Supply | 3× 400 V AC, 50 Hz |
|---|---|
| Charging power | up to 11 kW, adjustable |
| Socket | Type 2 with motorised lock |
| Protection | EV protection device AC 30 mA + DC 6 mA |
| Temperature sensors | power electronics |
| Status indication | RGB indicator |
| Ingress protection | IP54, indoor and outdoor |
| Operating temperature | −30 to +50 °C |
| Dimensions | 300 × 228 mm |
| Front panel | Burberry stripes, Antracit stripes, White |
| Wire connection | push-in terminals |
| Standards | IEC 61851, IEC 62196 |
| Manufacturing | Czech Republic |
Choosing a variant
The station comparison sets out the differences between BASIC and SMART, cable and socket, together with power recommendations. Installation and commissioning are carried out by certified IONT partners.