Type 2 22 kW charging cable specifications
| Power | 22 kW, three-phase charging (AC) |
|---|---|
| Current | 3-phase, 32 A |
| Voltage | 400 V AC |
| Connectors | Type 2 – Type 2 (IEC 62196-2) |
| Lengths | 5–12 m (in 1 m steps) and 15 m |
| Compatibility | All cars and stations with a Type 2 connector. Also charges cars with an 11 kW on-board charger. |
| Protection | IP55, water and dust resistant |
| Temperature protection | Sensors in both connectors, automatic cut-off at 100 °C |
| Contacts | Dynamic temperature compensation for stable power transfer |
| Pin protection | Rubber caps on the connectors |
| Standards | IEC 62196-1, IEC 62196-2, IEC 61851-1, EN 50620 |
| Warranty | 3 years |
| Manufacture | Designed and made in the Czech Republic |
Charging Cable TYPE2 - TYPE2 | 22 kW | Made in the Czech Republic 🇨🇿
Reliable and Safe Connection Cable between EV and Charging Station
Looking for a high-quality charging cable that supports fast charging while ensuring safety even in demanding conditions? This TYPE2 - TYPE2 22 kW cable is the ideal choice for every EV driver – lightweight, durable, and designed for everyday use..
🔹 Key Features:
✔ Safety with Temperature Sensors – Both ends of the cable are equipped with temperature sensors that automatically disconnect charging when the temperature reaches 100°C, protecting both the cable and your vehicle.
✔ Ergonomic Connector Design – Comfortable grip and easy handling, even with frequent use.
✔ Protection and Durability – Connectors feature rubber caps that protect the pins from dirt, dust, and moisture..
✔ Dynamic Contact Temperature Compensation – Equipped with technology that compensates for thermal expansion, ensuring stable power transfer even at high currents. .
✔ Water-Resistant Design – Rated IP55, protecting the cable from water and dust, allowing for use in various conditions.
✔ Power up to 22 kW – Three-phase charging support enables maximum efficiency for charging your electric vehicle.
✔ Made in the Czech Republic – High-quality workmanship with a focus on safety and long service life.
🔹 Complies with All Relevant Standards::
• IEC 62196-1, IEC 62196-2 – Standard for charging connectors and cables
• IEC 61851-1 – Safety requirements and charging process management
• EN 50620 – Specifications for cables designed for electric vehicles
🔹 Technical Specifications:
✅ Power: 22 kW (three-phase charging)
✅ Connectors: TYPE2 - TYPE2 (IEC 62196-2)
✅ Standards: IEC 62196-1/-2, IEC 61851-1, EN 50620
✅ Temperature Sensors: Yes, on both connectors (automatic shutdown at 100°C)
✅ Dynamic Contact Temperature Compensation: Yes, optimizes power transfer under high load
✅ Connector Protection: Rubber caps to protect pins
✅ Protection Rating: IP55 – Resistant to water and dust
✅ Made in: Czech Republic
This robust yet lightweight cable is your reliable travel companion – just toss it in your trunk and be ready for every charge! 🚗⚡
Integrated Temperature Sensor for Safety
- A temperature sensor built into the charging cable, designed to automatically disconnect charging if the temperature exceeds 100°C..
- This advanced safety feature protects both the charging cable and the vehicle from potential damage caused by high temperatures, thereby increasing the reliability and safety of the charging process.
- The cable is equipped with a temperature sensor on each end..
