How much does a home wallbox cost (2026): price list, what drives installation cost, inspection and subsidies

The wallbox price in the e-shop is only the beginning. The second part is installation, priced by a certified partner and depending on the distance from the switchboard and the state of the wiring. We compiled the station price list, three model installation situations from the simplest to trenching to a detached garage, and calculated the payback.

What the price is made of

The turnkey price of a home wallbox has four parts: the station, installation material, the electrician's labour and the inspection. The station is usually 55 to 70 % of the total; the rest depends mainly on the distance from the switchboard and the state of the wiring. A serious quote therefore cannot be made over the phone without a photo of the switchboard and an estimate of the cable route. Prices below are Czech list prices in CZK with euro equivalents at roughly CZK 25 per euro.

e:car WALL price list (2026)

Always included in the station: integrated residual current protection (AC 30 mA + DC 6 mA), a socket with motorised lock or a cable with Type 2 connector, stainless steel body with tempered glass, IP54 for outdoor mounting, RGB status light and a temperature sensor. The SMART version adds consumption metering, the IONT.info app, RFID, dynamic load management and its own meter at the supply for charging from photovoltaic surplus. Details in the selection guide.

Installation: three model situations and what drives the price

What can lower the price

• Subsidies. In the Czech Republic the Oprav dum po babicce grant gives CZK 10,000 per charging point as part of the photovoltaics grant (available only together with insulation); the station needs dynamic load management (SMART version). Companies and sole traders draw up to CZK 50,000 for an AC station from Záruka Elektromobilita. Details in Subsidies 2026.
• EV tariff. Not a discount on the wallbox, but a saving of EUR 300 and more a year on electricity for the whole house. The installation's inspection report is the basis.
• Preparation during construction. If you are building or renovating, have a 5× 6 mm² cable run to the garage now. It saves the most expensive installation item.
• The right power. 11 kW instead of 22 kW saves not just CZK 2,000 on the station but above all a bigger main fuse and reserved capacity.

A cheap online wallbox for EUR 320: where is the catch

Wallbox offers start under EUR 400. The difference to a manufacturer's station from EUR 600 is usually in five things:

1. Residual current protection. Cheap stations often lack the integrated DC residual current protection that the standard requires. A type B RCD in the switchboard then costs EUR 160 to 320 extra.
2. IP rating and material. A plastic body with IP44 does not belong on a south-facing facade. Stainless steel and tempered glass with IP54 last a decade outdoors.
3. Load management. Without it there is no subsidy and no use of photovoltaics.
4. Service and updates. Who repairs the station in three years? A European manufacturer has parts and service close by and adds features via online updates.
5. Warranty and documentation. The inspection technician and the insurer need a declaration of conformity and a data sheet in the local language.

Payback of a home wallbox

Model example: a SMART 11 kW wallbox at CZK 21,900 (EUR 880) excl. VAT, plus installation as quoted by the partner. Against socket charging you save losses (about 10 % of 2,700 kWh = 270 kWh, EUR 60 a year), with the EV tariff another EUR 320 a year and with photovoltaics EUR 200 a year. Total EUR 580 a year; the station itself pays back within two years, with installation somewhat later depending on its price. Without photovoltaics and without a tariff change the wallbox pays back mainly in comfort and safety, financially in 8 to 10 years.

What a serious quote should contain

• The exact station type with power, version (socket or cable, cable length) and product code.
• Itemised material: breaker with characteristic, cable with cross-section and length, conduit or trunking, possibly surge protection and an RCD if not in the station.
• Labour: mounting, cable pulling, penetrations, trenching, switchboard work, commissioning and app setup.
• Inspection as a separate item stating that it will be done by a licensed inspection technician.
• Documents for subsidy and tariff: data sheet confirming load management, declaration of conformity, inspection report.
• Warranty and service: warranty length, who handles service and how fast, parts availability.
• Delivery and installation date.

A one-line quote "wallbox including installation EUR 1,000" allows no comparison and often hides a missing inspection or RCD. Ask for the breakdown and compare items, not just the total.

Summary in five points

1. The e:car WALL wallbox costs from CZK 14,900 (EUR 600) excl. VAT for BASIC 11 kW to CZK 37,900 (EUR 1,520) for the dual-outlet SMART.
2. The installation price is driven by the cable route, the switchboard and any trenching; a certified partner sets it after an on-site assessment.
3. The price rises with a full switchboard, no three-phase supply and a main fuse upgrade for 22 kW.
4. A subsidy and an EV tariff worth EUR 300 a year cut the cost substantially.
5. Compare itemised quotes, not one total, and check the RCD, IP54 rating and local service.

Často kladené otázky