Overview
Public AC charging station with two tethered Type 2 cables
e:car WALL PRO PREMIUM AFIR is an AC charging station for public and commercial sites with two tethered Type 2 cables and an output of 22 kW, variable up to 2× 22 kW. Each output has its own MID-certified meter, the 7″ display shows a QR code for payment and the station complies with the AFIR regulation. Designed and manufactured in the Czech Republic.
Key features
Two outputs
Two tethered Type 2 cables with temperature sensors, 5 m as standard (8, 10 or 12 m optional).
MID billing meters
Each output has its own MID-certified energy meter. Energy delivered can be billed accurately and verifiably, or allocated to employees or guests.
7″ display
Shows charging information and, when operated on an OCPP back end, a QR code for payment via a terminal, and static images or video while the station is idle. A vandal-resistant button switches the display language.
Control and access
LAN, OCPP 1.6J and 2.0.1, a 13.5 MHz RFID reader and over-the-air (OTA) firmware updates. Load Balance shares the available supply capacity between stations and requires IONT meter.
Protection
EV residual current device for each output (AC 30 mA + DC 6 mA); no Type B RCD is required. Temperature sensors in the power electronics and at both ends of each cable stop charging if the temperature is too high.
Construction and warranty
Stainless steel body, tempered glass and a painted front panel, lockable with shaped locks, IP54 rating, operation from −30 to +50 °C. Warranty: 2 years on the unit, 3 years on the power electronics.
Technical specifications
| Power supply | 3× 400 V AC, 50 Hz |
|---|---|
| Charging power | 22 kW (three-phase), variable up to 2× 22 kW |
| Outputs | 2× tethered Type 2 cable |
| Cable length | 5 m (8, 10 or 12 m optional) |
| Protection | EV RCD for each output, AC 30 mA + DC 6 mA |
| Temperature sensors | power electronics, both ends of each cable |
| Metering | MID-certified meter for each output |
| Payment | QR code for payment via a terminal when operated on an OCPP back end |
| Power management | Load Balance, power sharing between stations (requires IONT meter) |
| Communication | LAN, OCPP 1.6J, OCPP 2.0.1 |
| Authorisation | autonomous mode, RFID 13.5 MHz |
| Display | 7″, shows QR code, information, images and video |
| Controls | vandal-resistant language button |
| Updates | over-the-air firmware (OTA) |
| Status indication | RGB charging status indicator |
| Ingress protection | IP54, indoor and outdoor |
| Operating temperature | −30 to +50 °C |
| Construction | stainless steel body, tempered glass, painted front panel, shaped locks |
| Front panel | Cookie brown |
| Dimensions | 620 × 430 × 174 mm |
| Wire connection | push-in terminals |
| Standards | IEC 61851, IEC 62196 |
| Public charging | compliant with the AFIR regulation |
| Made in | Czech Republic |
Configuration and quotation
Cable lengths, access settings and delivery date are specified in the quotation. Installation and commissioning are carried out by certified IONT partners.